^100% up to a maximum incentive cap per unit that varies by type of equipment and door size. Total project incentive cannot exceed $40,000 per customer site. *The equipment offered through this program reduces air loss up to 90% by creating a seal up to 90%, as determined by manufacturers. **Actual costs, natural gas bill savings and payback may vary. All examples are approximate and based on the cost of a typical door size and installation. Offer is available for commercial buildings with an active Enbridge Gas account with shipping doors that have not already been updated/replaced through an Enbridge Gas energy efficiency program. The building must have natural gas space heating and the space adjacent to the shipping door must be heated during the heating season by natural gas-fueled equipment. Shipping doors with vestibules are not eligible. Other door sizes not listed above may be eligible. Only existing buildings are eligible for this program; new construction is not eligible. For air curtains: Replacement of existing air curtains is not eligible and air curtains are not eligible on dock-in doors where other mechanisms that combat infiltration are present, such as dock door seals. Equipment installed must be tested by a third-party performance standard (ANSI/AMCA 220-05 or similar) and installed as per manufacturer specifications. For dock door seals: Replacement of existing deteriorated seals or the addition of new seals to existing dock-in style shipping doors that do not have any type of seal in place are eligible. If other mechanisms that combat infiltration at the dock-in door are present, such as air curtains, it is not eligible. Two types of seals (compression and shelter) are eligible based on door size. Compression seals (this is a foam pad that is wide and fixed to the door, with a minimum of 40 oz. vinyl cover) on 8' x 8', 8' x 9' and 8' x 10' doors. Shelter type seals (this is a curtain-like seal with minimum 40 oz. vinyl with shelter frame that is made of steel with foam pad or foam core that compresses against the sides and top of the trailer box on 9.5' x 10.5' or 10' x 10' doors. Other door sizes not listed may be eligible but must be reviewed and approved by Enbridge Gas Inc. Both seal styles, compression and shelter, require 4" exposure wear pleats. Existing deteriorated seals are only eligible if the existing seal has a minimum average two-inch gap based on a six-point measurement. This measurement must be taken and provided with the application form to be eligible. If a measurement is not provided with the application, then it is not eligible. Shipping Door Equipment Installation Program incentive offer is conditional until eligibility (outlined above) is confirmed. Participants in the 2025 Shipping Door Equipment Installation Program offer must sign a work order application form and have the equipment installed in their facility no later than November 28, 2025. This offer is limited in terms of time and budget and is available to customers on a first come, first served basis. Additional terms and conditions apply.
Disclaimers:
Any references to energy savings is based on the assumption that the participant is reducing their natural gas consumption through participation in the Small Business Program.
The savings claim is provided for informational purposes only and is based on the Ontario Energy Board Technical Resource Manual (TRM). These projections are specific to this example, and actual savings may vary for each project.
1. https://www.energystar.gov/sites/default/files/dckv_technology_profile.pdf
2. https://natural-resources.canada.ca/sites/nrcan/files/energy/pdf/energystar/Commercial-Kitchen-Guide_E_acc.pdf
References to energy savings are not a guarantee of any actual reductions in energy use, which will vary based on project specifics including site conditions, end-use type, and other external factors.